Refurbished multidetector CT scanners supplied through MaxMed Systems are sourced exclusively from verified German and EU refurbishers, supporting private radiology centres, diagnostic clinics and hospital-based imaging departments.
Systems in this category cover a broad range of diagnostic workflows, including routine examinations, trauma evaluation, oncology staging and follow-up, vascular studies and specialised applications. Performance varies by detector count, generation and software configuration.
All units are supplied with verified technical status, documented service histories, calibrated performance parameters and transparent component records.
Pre-shipment evaluation includes:
All installation, acceptance testing and clinical applications training are performed exclusively by authorised technicians under EU compliance requirements and the operational standards of the local clinic.
Typical brands:
Siemens SOMATOM series, GE BrightSpeed / LightSpeed, Philips Brilliance, Canon Aquilion.
Slice range:
16–64 detector systems.
Availability:
Constant availability across the EU refurbished market, with highest turnover from German and Dutch clinical sources.
Suitable for:
general radiology, emergency diagnostics, oncology, orthopaedics, ENT, urology, outpatient imaging.
Service options:
Supplier-based servicing and maintenance contracts available depending on region, equipment generation and configuration.
Refurbished 1.5T MRI platforms supplied through MaxMed Systems originate exclusively from EU hospitals and certified refurbishers, supporting private radiology centres, multidisciplinary imaging departments, neurology and orthopaedic practices.
All systems undergo complete technical verification, including:
Image-quality benchmarks and component integrity are fully documented prior to shipment.
Available configurations support neuro, musculoskeletal, abdominal, pelvic, vascular and oncology imaging, depending on coil sets, sequence packages and software generation.
Coil availability and system configuration vary by supplier and model type.
Installation, acceptance testing and applications training are performed exclusively by certified technicians, in accordance with EU operational, safety and facility requirements.
Typical brands:
Siemens Magnetom series (Avanto, Aera), GE Signa series, Philips Ingenia / Achieva.
Field strength:
1.5 Tesla.
Availability:
Dependent on EU hospital de-installations, with the most consistent sourcing from Germany and Scandinavia.
Suitable for:
– neuroimaging
– musculoskeletal imaging
– abdominal & pelvic protocols
– oncology follow-up
– routine private practice MRI workflows
Service options:
Supplier-based service contracts, cold-head maintenance packages and technical support agreements available depending on region, configuration and coil packages.
Refurbished ultrasound systems supplied through MaxMed Systems originate from verified EU clinical environments and certified refurbishers. All configurations support multi-disciplinary diagnostic workflows, including general imaging, abdominal protocols, obstetrics and gynaecology, vascular mapping, musculoskeletal imaging, and basic cardiac assessments.
Each system undergoes documented performance verification, including:
Probe availability varies by supplier and generation. Only clinically approved probes with validated performance reports are offered.
Applications training and on-site acceptance testing are performed exclusively by certified supplier technicians, aligned with EU facility standards and imaging protocols.
Typical brands:
GE Logiq / Voluson / Vivid series, Philips Affiniti / Epiq series, Siemens Acuson X-Series, Samsung RS-Series.
Available modalities:
– general imaging
– abdominal and pelvic imaging
– obstetrics & gynaecology
– vascular and Doppler studies
– musculoskeletal protocols
– cardiac and stress echo (depending on probe configuration)
Probe sets:
Convex, linear, phased-array, endocavitary and 3D/4D probes available depending on sourcing and generation.
Suitable for:
Private clinics, multidisciplinary imaging departments, outpatient diagnostic centres, fertility clinics, and vascular laboratories.
Service options:
Supplier-based probe replacement plans, software maintenance, calibration checks and extended support packages depending on region and modality.
Refurbished C-arm systems offered through MaxMed Systems are sourced exclusively from certified EU refurbishers and hospital-based radiology or surgical departments. All units undergo documented exposure testing and mechanical evaluation to ensure safe, stable performance during intraoperative use.
Technical verification includes:
Systems are available in configurations suitable for orthopaedics, trauma surgery, vascular procedures, ER/OR environments and pain-management applications. Accessories such as monitors, carts and dose-management tools vary by model and sourcing region.
Installation, clinical acceptance testing and user training are provided exclusively by authorised supplier technicians.
Typical brands:
Siemens Arcadis series, Philips BV series, GE OEC series, Ziehm Vision / Solo / RFD platforms.
Detector types:
– image intensifier (9" / 12")
– flat-panel detector (varies by generation)
Suitable for:
– orthopaedic and trauma surgery
– vascular imaging (model-dependent)
– pain clinic procedures
– ER/OR support
– outpatient surgical centres
Availability:
Stable supply across the EU refurbished market, primary sourcing from Germany, Benelux and Scandinavia. Detector technology and software packages vary by production year and clinical origin.
Service options:
Supplier-based maintenance plans, detector calibration services, mobile workstation replacement, and dose-management validation depending on configuration and region.
Patient monitoring systems supplied through MaxMed Systems originate from EU hospitals and certified refurbishers operating under documented test protocols. All units and modules are validated for stable, continuous operation in ICU, OR, HDU and emergency environments.
Verification includes:
Systems are available as bedside monitors, transport monitors, or modular central station configurations. Parameter availability varies by model generation and supplier inventory.
Installation, network integration and clinical acceptance testing are performed exclusively by authorised supplier technicians, in line with hospital IT and biomedical engineering requirements.
Typical brands:
Philips IntelliVue series (MX, MP), GE CARESCAPE B-series, Dräger Infinity Delta/XL, Mindray BeneVision (EU hospital batches only).
Suitable for:
– intensive care units (ICU)
– high-dependency units (HDU)
– operating rooms (OR)
– emergency/ER workflows
– step-down and recovery areas
– transport monitoring (model-dependent)
Parameter sets:
ECG, SpO₂, NIBP, IBP, EtCO₂, temperature, cardiac output, neonatal modules (varies by model).
Availability:
Consistent across the EU refurbished market, with highest turnover from German, Dutch and Scandinavian clinical sources. Module combinations depend on original hospital configuration.
Service options:
Supplier-based maintenance contracts, module calibration services, replacement module sourcing, and network integration support depending on region.
Refurbished anaesthesia workstations supplied through MaxMed Systems originate exclusively from EU hospitals and certified refurbishers operating under documented test and safety protocols. All systems undergo comprehensive verification to ensure stable and compliant clinical use in operating theatres, procedure rooms, and critical-care settings.
Verification includes:
Configurations vary by model generation and supplier inventory. Compatible vaporizers (Sevoflurane, Isoflurane, Desflurane) are supplied based on technical documentation and remaining service life.
Installation, calibration and clinical acceptance testing are performed exclusively by authorised supplier technicians in accordance with hospital biomedical engineering requirements.
Typical brands:
Dräger Fabius / Primus series, GE Aisys / Avance / Aespire series, Mindray WATO series (EU batches only).
Suitable for:
– general anaesthesia workflows
– adult and paediatric ventilation
– routine OR procedures
– ICU procedural sedation
– day-surgery and multi-specialty theatres
Key verified components:
– ventilator modules (PCV, VCV, SIMV depending on model)
– calibrated vaporizers
– fresh gas delivery system
– breathing circuits and absorber systems
– monitoring interfaces and software versions
Availability:
Strong rotation within the EU refurbished market, primarily from German, Austrian and Scandinavian hospital sources. Vaporizer models and ventilator modes differ by original configuration.
Service options:
Supplier-based technical maintenance, vaporizer calibration, ventilator servicing, software updates (model-dependent), and compliance documentation for hospital acceptance.
Digital radiography rooms supplied through MaxMed Systems originate exclusively from EU hospitals and certified refurbishers operating under documented refurbishment and detector-validation protocols.
Systems include fixed X-ray generators, wired or wireless flat-panel detectors, motorised or manual vertical stands, bucky tables and workstation platforms depending on supplier availability and system generation.
Configurations support chest, skeletal and general radiographic workflows.
Detector size, acquisition software and workstation capabilities vary according to model generation, refurbishment specifications and clinical requirements.
Each system is supplied with verified detector condition, documented imaging performance data and full configuration transparency.
Pre-shipment verification includes:
Installation, commissioning and applications training are performed exclusively by certified supplier technicians, ensuring complete alignment with EU radiology operational standards.
Typical brands:
Siemens Ysio / Multix series, GE Definium series, Samsung GC85
Detector options:
wired or wireless flat-panel detectors (14×17, 17×17)
Availability:
generally stable across EU private radiology markets; strongest turnover from German and Dutch hospital sources
Suitable for:
– chest radiography
– skeletal imaging
– general routine radiography
– private imaging centres with standard DR workflows
Service options:
supplier-based servicing contracts depending on configuration, detector type and regional requirements.
Mobile radiography systems supplied through MaxMed Systems originate exclusively from EU hospitals and certified refurbishers operating under documented refurbishment and detector-verification protocols.
Units are configured for bedside imaging in intensive care units, emergency departments, surgical centres and intra-hospital transport workflows, depending on generator output, detector type and mobility design.
Systems are validated for:
Each system is delivered with verified technical status, documented performance data and full configuration transparency.
Installation, commissioning and applications training are performed solely by certified supplier technicians, ensuring full compliance with EU hospital operational requirements.
Typical brands:
GE AMX series, Siemens Mobilett
Detector formats:
analogue, CR or DR (depending on supplier inventory)
Availability:
generally high across EU private markets; most consistent supply from German and Dutch hospitals
Suitable for:
– bedside radiography
– ICU and ER imaging
– intra-hospital mobile workflows
– private surgical centres
Service options:
supplier-based servicing contracts depending on configuration and region.
Digital mammography systems supplied through MaxMed Systems originate exclusively from EU hospitals and certified refurbishers operating under documented detector-performance and calibration protocols.
Units support both screening and diagnostic workflows, depending on detector specifications, software generation, image-processing capabilities and system ergonomics.
Validation includes:
All systems are delivered with verified technical condition, documented performance data and full configuration transparency.
Installation, commissioning and applications training are performed solely by certified supplier technicians, ensuring alignment with breast-imaging operational requirements.
Typical brands:
GE Senographe series, Hologic Selenia / Dimensions, Siemens Mammomat
Detector formats:
2D FFDM or 3D tomosynthesis (depending on supplier inventory)
Availability:
variable; dependent on European stock rotation
Suitable for:
– private breast cancer screening programmes
– diagnostic mammography
– tomosynthesis workflows (where available)
– stereotactic guidance (on selected models)
Service options:
supplier-based servicing contracts depending on configuration, detector type and region.
Complete endoscopy tower platforms supplied through MaxMed Systems originate exclusively from EU hospitals and certified refurbishers operating under documented performance and scope-condition protocols.
Systems include video processors, light sources, monitors and scopes, with configuration sets dependent on procedure type (upper GI, lower GI, laparoscopy, ENT) and supplier inventory.
Verification and refurbishment steps include:
All units are supplied with documented processor hours, scope condition reports and full configuration transparency.
Installation, commissioning and applications training are performed solely by certified supplier technicians.
Typical brands:
Olympus (CV series, EVIS Exera series), Karl Storz (IMAGE 1 / IMAGE 1S platforms)
Processor & light-source formats:
standard definition or HD (depending on supplier inventory)
Availability:
moderate; dependent on European stock rotation
Suitable for:
– upper and lower GI procedures
– laparoscopic surgical workflows (depending on configuration)
– ENT procedures
– private day-surgery environments
Service options:
supplier-based service contracts depending on processor generation, scope type and region.
Operating tables supplied through MaxMed Systems originate exclusively from EU hospitals and certified refurbishers operating under documented mechanical and electro-hydraulic test protocols.
Systems support multidisciplinary private surgical workflows — general surgery, orthopaedics, urology, gynaecology and day-case procedures — with table class, motorisation level and accessory configuration determining procedural suitability.
Verification and refurbishment steps include:
All units are supplied with documented performance data, configuration transparency and installation guidance.
Installation, calibration and hand-over training are performed solely by certified supplier technicians.
Typical brands:
Maquet Alphastar / Alphamaquet series, Trumpf Medical, Schaerer, Medifa
Table formats:
electrohydraulic or electromechanical (depending on inventory)
Availability:
stable across EU surgical markets
Suitable for:
– general surgery
– orthopaedics
– urology and gynaecology
– private day-surgery environments
– multidisciplinary operating workflows
Service options:
supplier-based service contracts depending on motorisation class, age and region.
Refurbished premium dental units supplied exclusively to private dental practices and multidisciplinary dental centres.
All units originate from EU clinics and certified refurbishers, with verified configurations, documented technical status and full refurbishment transparency.
Systems include patient chairs, delivery units, suction modules, lighting systems, integrated instrument packages and foot-control interfaces, depending on model generation and supplier inventory.
Verification steps include chair-motor performance checks, hydraulic/electromechanical functionality testing, instrument calibration validation, lighting system inspection and full electrical-safety compliance under EU/EN dental standards.
Units are delivered with transparent configuration data, validated operating functions and supplier-certified readiness for clinical integration.
Installation and applications support are performed solely by certified supplier technicians.
Typical brands:
Sirona, Planmeca, Stern Weber
Availability:
high across EU private dental markets
Suitable for:
– private dental clinics
– general dentistry workflows
– implantology procedures
– orthodontic practices
Service options:
supplier-based servicing contracts available depending on configuration, accessories and region.
Robotic surgery platforms are supplied exclusively on a project-based basis for private hospital networks and surgical research centres. Units originate from EU hospital groups and certified project integrators, with each platform undergoing full regulatory evaluation, configuration validation and supplier-level approval prior to release.
Configurations support advanced minimally invasive surgical workflows, determined by platform generation, instrument availability, vision-system specification and software package. Each system is delivered with verified technical status, documented performance baselines, operating-hour transparency and full configuration disclosure.
These platforms are not part of standard refurbished stock. Systems are sourced strictly upon formal project request, subject to engineering feasibility, compliance checks and supplier scheduling.
Installation, system integration and applications training are performed exclusively by certified supplier robotics teams, according to EU surgical-safety requirements and manufacturer protocols.
Typical platforms:
– Intuitive Surgical DaVinci Si
– Intuitive Surgical DaVinci Xi
– Research and training units (subject to supplier availability)
Availability:
project-based sourcing only; no stock inventory
Suitable for:
– private hospital networks
– minimally invasive surgery programmes
– surgical research and training centres
– high-complexity private operating theatres
Service options:
supplier-based installation, integration support and servicing contracts depending on platform generation, regulatory framework and region.
MaxMed Systems
European Medical Technology Supplier · Online-Based Operations (EU Network)
Email: contact@maxmedsystems.eu
Compliance & Technical Assurance Statement
All systems supplied through MaxMed Systems originate exclusively from certified EU refurbishing centres and CE-validated engineering partners.
Each unit undergoes full technical verification under EU engineering, compliance, quality, and safety frameworks — including calibration records, diagnostic testing outputs, component-level traceability, lifecycle documentation, and integration-readiness validation.
MaxMed Systems operates as an online-based supplier with no public office location.
All procurement, technical evaluations, and customer communication are coordinated through our EU engineering network.
© 2025 MaxMed Systems — All rights reserved.
We use essential cookies to ensure the secure and reliable operation of this website.
Analytics cookies are used only to help us understand site performance and improve user experience.
You may accept or decline analytics cookies at any time.